Film for STEPSTAR
- Brand: Китай
- Product Code: Пленка для STEPSTAR COMFORT
- Availability: In Stock
The film for the Stepstar consists of polyvinyl chloride. Material that makes this material unique. It forms a shoe cover on the user's leg with the correct direction of the hot air flow. The temperature of which is 80 degrees Celsius. The device is designed in such a way that it simply does not physically heat it and, especially, burn the foot to the user for at least two reasons. The first is that the air flow is very accurately directing ideally on the film. The second is that the speed of shoe covers is 3-4 seconds. Which is very fast.
How to replace the roll itself with the Stepstar? Let's take a step-by-step look:
Step one. Turn off the device. Open the back cover to load the film and remove from it a tube (on which was the film that has already been used).
Step two. Turn the device on. We take a new roll, unpack it. We insert the bobbin in such a way that the end would be from above as indicated on the video. We pass the film into a special cell on which there are arrows. Press the button on the machine to capture the film. The apparatus begins to feed it.
Step three. Close the lid of the device. Delam test shoe covers.
That's all you need to replace the film in the device for putting on shoe covers Stepstar
The roll is designed for 1000 detachments, that is, for 500 pairs of shoe covers. Specially created under the device for putting on shoe covers Stepstar. The film itself is very strong and has a thickness of 28 microns that is times denser than usual shoe covers.
The shoe itself becomes very elastic and wear-resistant. Designed for a long stay of the user in the shoe covers. It does not leak and does not drop, as it is formed for each footwear individually.
If you have any questions, please call, we will be happy to help you.